Fenix CL26R PRO is a practical portable rechargeable lantern that you can use to light a room, tent, campsite, caravan, cabin, boat or work table. In addition, it also has a powerbank function, so it can be used to charge other USB devices. The lantern offers the function of circular lighting and bottom lighting, individual light modes are switched with a rotary control. In addition, both methods of lighting can be combined and thus achieve a total output of up to 650 lumens.

CL26R PRO is powered by a Li-ion battery type 21700 with a capacity of 5000 mAh (included in the package), which is charged directly in the lantern using a USB-C connector and it will supply energy for up to 408 hours of operation in the lowest mode. There is also red light, which does not disturb the adaptation of the eyes to the dark.

Front one-way lighting and bottom lighting are very practical significantly energy-saving functions. It is particularly useful in situations where circular omnidirectional lighting is not needed.

Thanks to the durable and impact-resistant construction with IP66 coverage, the flashlight can be safely used even in adverse weather (heavy rain). The upper side of the lantern is equipped with a hanging eye with the possibility of opening it like a carabiner and a strong neodymium magnet, so it can be easily hung or fixed to anything iron. Thanks to its compact dimensions, the lantern is especially suitable for camping and hiking, you can also use it in a caravan, boat or cottage.

All parameters of the flashlight (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in compliance with the ANSI/ NEMA FL 1-2009.

Fenix CL26R PRO rechargeable lantern parameters

• The light source is highly bright SMD diodes and red LEDs.
• Six circular lighting modes: 500 lumens (10 hours) -> 200 lumens (13 hours) -> 50 lumens (40 hours) -> directional lighting 25 lumens (67 hours) -> red light 3 lumens (125 hours) -> red flashing 3 lumens (240 hours)
• Three modes of bottom lighting: 150 lumens (15 hours) -> 50 lumens (58 hours) -> 5 lumens (408 hours) .
• Round and bottom lighting modes can be combined and thus achieve a total output of up to 650 lumens.
• Electronics with extended lighting time function and protection against reverse battery insertion.
• It is powered by 1x Li-ion battery 21700 with a capacity of 5000 mAh (included in the package), any 21700 battery from our offer.
• Charging via USB-C connector.
• Powerbank function with USB-A output connector for charging other portable electronics with USB charging.
• Made of durable plastic, the lantern is impact-resistant when dropped from a height of 1 meter.
• Waterproof according to the IP66 standard (spraying with strong streams of water from all directions).
• The omnidirectional diffuser creates a wide, uniform light cone with a reach of up to 15 meters.
• The upper side is equipped with a hanging eye with a carabiner function and a neodymium magnet for attaching to anything iron.
• Dimensions 6 cm (diameter) x 6.6 cm (at the widest point including the controller) x 11.4 cm (height).
• Weight 272 grams (including battery), 199 grams (without battery).
• The package includes a lantern, a Fenix ARB-L21-5000 V2.0 battery, a spare o-ring and a USB-C cable.
• You can also buy a USB power adapter and USB car adapter.

Using the Fenix CL26R PRO

There may be an insulating cap on the battery inside the lantern from the factory. Remove it from the battery before first use.

Turning the switch clockwise will turn on the main circular light. Turning the switch counterclockwise turns on the bottom light. By turning the switch in the selected direction, the lighting modes of the switched-on light are switched. By turning the switch to the middle “off“ turn off the lantern again.

Combination of main and lower light: main and lower light can be combined. Turn one of them on with the rotary switch to the desired performance mode. The second light is then switched on by holding the electronic switch for 0.5 s, its modes can be switched further by pressing the button.

When the lantern is off, the red light is turned on and off by holding the electronic switch for 0.5s. When it is on, the red light modes are switched by pressing the button.

Bat charge status indicationerie - after a short press of the button (the lantern must be switched off), the LED indicator of the charge status above the switch is activated. Four lit LEDs mean the battery is 80-100% charged, three lit 60-80%, two lit 40-60%, one 20-40% and one blinking means the battery is less than 20% charged.

Powerbank function

Open the dust cover and insert the USB cable into the USB Type A discharge port on the flashlight, then connect the other end of the cable to the USB device being charged. If the lantern is on, the power bank function is activated automatically after connecting the USB cable. If it is off, press the electronic switch, the indicators will move from right to left to show the status. During discharge, you cannot use the highest power or combine main and lower light modes. Be sure to seal the dust cap after charging is complete. If the battery voltage is too low, the power bank function will turn off.

Charging the Fenix CL26R PRO lantern

To charge the lantern, unfold the anti-dust rubber cover. Connect the lantern using the included USB-C cable to a computer, USB network adapter or USB car adapter. A standard mobile phone charger or power bank can also be used for charging. During charging, the indicator LEDs above the switch flash to show the charging progress. They will remain lit after charging.

The battery does not suffer from a memory effect, so it can be recharged at any time and there is no need to wait until it is discharged. Charging a fully discharged battery takes about 3.5 hours (depending on the power of the charging source used).

During charging, the lantern can only be turned on in 5, 25 and 50 lumen mode.

Warning

• Do not disassemble the sealed parts yourself, this will void the warranty.
• If the flashlight flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  • The battery is almost empty – charge it.
  • The electrical contacts are dirty – clean them with a cotton swab dipped in alcohol.
  • Battery cap is loose, tighten it.