The second generation of the popular Fenix E01 V2.0 mini flashlight offers three power modes with light output up to 100 lumens (ANSI). Its negligible size makes it an ideal representative of the EDC (Every Day Carry) category, it can be carried with you at all times, whether in your pocket, on your keys or in your wallet. The flashlight is not much bigger than the micro-cell AAA battery from which it is powered. Of course, it is of high quality design, durability and waterproof. The ultra-thin collimator produces a wide light cone with a reach of up to 35 meters. The flashlight is destined by its features to serve as a small reliable companion that is always at hand. S You will always be pleased with this useful gift.

All flashlight parameters (luminous flux, battery life, waterproofness, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Fenix E01 V2.0 flashlight specifications

• The powerful Luminus SST-20 LED with a 50,000 hour lifetime is used.
• Three power levels:
  • Measured with rechargeable NiMH battery: 100 lumens (50 minutes) -> 25 lumens (4.5 hours) -> 5 lumens (23 hours).
  • Measured with disposable alkaline battery: 100 lumens (50 minutes) -> 25 lumens (4.8 hours) -> 5 lumens (25 hours).
• Uses only one AAA battery (AAA type - alkaline, lithium or rechargeable NiMH). These batteries are cheap and widely available.
• The longest lasting batteries will be the Energizer L92 lithium rechargeable batteries (especially suitable for extreme temperature conditions).
• Duration times are measured with a 750mAh rechargeable NiMH battery and the included alkaline disposable battery.
• Supported battery voltage 0.9-1.7V.
• Dimensions 6.65cm (length) x 1.5cm (head diameter) x 1.4cm (body diameter).
• Weight 13 grams (without battery).
• Wide light cone with a range of 35 meters (304 cd).
• Made of aerospace-grade hardened aluminum. Durable surface - Type III hard anodized.
• Shock resistant to drops from 1 meter.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters).
• Reliable rotary switch.
• Includes a metal ring for hanging on keys, a replacement o-ring and a micro alkaline battery.

Using of the Fenix E01 V2.0 flashlight

To turn on the flashlight, point the reflector away from you and turn it counterclockwise (tighten the head). Turning it in the opposite direction will turn the flashlight off again (loosening the head). To change the intensity of the brightness, quickly turn the flashlight off and back on from the on state. This will switch the flashlight to the next output level. If you leave the flashlight in the off mode for more than 1.5 seconds, it will return to the lowest illumination mode (5 lumens).

Overheat Protection - When operating on the highest mode for extended periods of time, the flashlight may reduce output to achieve optimal temperature and endurance.

Warning

• Do not disassemble the sealed part in the head of the flashlight yourself, it will violate the warranty.
• Do not remove the batteries from the flashlight if you will not be using it for a long time or if the battery is already discharged, especially with alkaline batteries there is a risk of draining them and consequently damaging the flashlight.
• Insert the battery with the positive pole towards the head of the flashlight.
• If the protective rubber rings appear damaged after prolonged use, replace them.
• If the flashlight flickers, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
  • The batteries are almost dead – replace them.
  • The contacts inside the flashlight are clogged – clean them with a cotton ball dipped in alcohol.